Several advices on how to maintain your hot tub? Here are some tips about how to maintain your hot tub and also a recommandation if you live in Colorado. Sorry to be the bearer of bad news, but drinking and hot tubbing are not a good mix. Despite all of those movies scenes depicting characters cavorting in hot tubs with their favorite beverage in hand, physicians and the U.S. Centers for Disease Control and Prevention (CDC) don’t recommend it. Sports stars and politicians have been known to imbibe while entertaining in a spa, but that doesn’t mean we should follow their example. The same caution should be used with drugs-check with your doctor before soaking in extremely hot water while taking a prescription. One reason is that both alcohol and some drugs (prescription and recreational) can cause drowsiness or disorientation. Check the water temperature before entering (it should not exceed 104 degrees), observe reasonable time limits (10 to 15 minutes), and enter and exit the tub slowly in case of dizziness or to prevent falls.

Turn your filtration cycle down. Your Arctic comes programmed for two four-hour cycles twice a day. If you don’t use your spa much, try two or three hours, and if you have an off-peak discount, set your filter cycles to come on during that period. But take care – proper filtration is necessary to maintain water quality.

Make sure you set a timer when you’re filling or refilling your hot tub. It can be all too easy to walk away and get caught up in other chores. The result? Potential overflows, a huge mess, and even fried equipment. A little preparation sure beats having to magically bail out your spa enclosure. Maintaining your spa’s water chemistry can be tricky. You can make it a little easier by starting with the cleanest water possible. When you’re filling up your hot tub, attach a hose filter to the hose. If you don’t have one, place the hose in your spa’s filter area so the incoming water will pass through the filter.

Advices for purchasing a hot tub : Get a better perspective for how your spa will fit by using rope or garden hose. Make an outline the size of the hot tub you want. Leave room for access to the equipment, steps and a cover lifter.

But first let’s view the hot tub choice of the month : HotSpring has 20 hot tub models, five of which are built for two or three people. Most of the hot tub manufacturers we evaluated have only three models, so HotSpring offers a better selection of small spas. Three of these spas are part of the brand’s Hot Spot collection, which fall into the value price range and have 10-17 jets. The other two are premium-priced spas from HotSpring’s top tier Highlife collection and have 14 or 22 jets. HotSpring also has 10 medium spas and five large spas with various price ranges, all of which come equipped with energy-saving features and are certified by the California Energy Commission. With five small hot tub models, Hot Spring has the best selection of two- and three-person hot tubs of the brands we reviewed. Find extra details on https://drspallc.com/.

Speaking of regular spa care, a full cleaning of the waterline and surfaces can be done when the spa is drained, which should happen every 2-4 months. Just be sure not to use any old household cleaner or soap. If you are going to use any chemical on your spa surfaces, use something like our Spa Cleaner to keep out phosphates, nitrates and who knows what else.

This spa care tip is so often forgotten. However, if the skimmer starts to suck air, it could possibly damage the pump. The water level should be in the middle of the skimmer intake or a little higher. You don’t want it too high, and you never want to overflow the spa, so keep a close eye on the water level while filling.

Your daily maintenance tasks are all about ensuring good water quality. In a hot tub that means checking two things: PH and sanitizer levels. This is easy stuff, and can generally be accomplished by dipping a single, color-coded test strip into the water to check that everything is as it should be. If you’re diligent about maintaining your tub, most days this won’t mean doing anything more than walking out to your tub, dipping the test stick in the water, and heading back inside. If your PH or sanitizer levels need adjusting, however, you’ll need take an extra few minutes to dump the proper additive into your water to get things back their proper levels. Doing so will prevent a host of problems, including scaling, mineral buildup, corrosion, skin irritation, and cloudy and stinky water.