Ultrasonic tank level measurement online shopping by drurylandetheatre.com? The Displacer level controller changes the magnetic float to a float. Displacer level transmitter uses tiny metal film strain sensing technology to measure liquid level, interface or density. Such as Fisher DLC3010 Digital Level Controller. The hydrostatic level controller works by using the measuring principle of hydrostatic pressure. Generally, a silicon pressure sensor is used to convert the measured pressure into an electrical signal. Then it is amplified by the amplifier circuit and compensated by the compensation circuit. Finally, it is output in 4-20ma or 0-10ma current mode. Sino-Inst offers over 10 Ultrasonic Liquid Level Controllers for level measurement. About 50% of these are fuel level meters, 40% is the tank level sensor.
The advantages of ultrasonic liquid level gauge are very outstanding. It is mainly reflected in the following aspects : Safe and clean. The instrument has long service life. The measurement is stable and reliable with high precision. Of course, the ultrasonic liquid level gauge also has its own limitations and insurmountable defects. Specifically, it is mainly manifested in: There should be no obstacles under the sound wave. Because the ultrasonic liquid level meter uses the principle of sound wave reflection to achieve liquid level measurement. If there are obstacles, it will affect the ultrasonic emission, causing signal loss and affecting the measurement effect.
Due to the non-contact measurement, the measured medium is almost unlimited. It can be widely used to measure the height of various liquid and solid materials. The ultrasonic liquid level transmitter is composed of three parts: ultrasonic transducer, processing unit and output unit. Find even more info at https://www.drurylandetheatre.com/ultrasonic-liquid-level-controller/.
Infrared online debugging function : Applicable to occasions where it is not suitable to open the cover for testing in dangerous situations. At the same time, it reduces the difficulty of debugging. Self-diagnosis function : It has its own working status diagnosis function. It also has hardware diagnosis function. It enhances the reliability and stability of the level gauge. One-key recovery function : When the external measuring level gauge works abnormally, it can be restored to the normal state with one key through the debugger. Local display and remote transmission function : The level gauge can not only display the level value on the spot in time. But also remotely transmit it to the control room through the signal line.
Ultrasonic level switch is installed outside the tank. No need to open holes in the tank. Non-Contact Measure. The ideal choice for tank level monitoring. Ultrasonic Level Switch, External Mounted (referred to as “external level switch”) is a new type of level measurement alarm device. Ultrasonic Level Switch is mainly used to detect the liquid level of the storage tank. It can realize the upper and lower limit alarm or monitor whether there is liquid in the pipeline (dry protection). The material of the storage tank can be various metals, non-metals or non-foamed plastics. The wall thickness can be Up to 70mm. Read additional info on https://www.drurylandetheatre.com/.