Industrial

Ultrasonic tank level sensor online shopping by drurylandetheatre.com

Top ultrasonic level switch online shopping? The Liquid Level Controller is attached to the outside of the tank. Non-contact detection of tank liquid level. Liquid Level Controller supports liquid level alarm, fault alarm, and 485, Modbus, 4-20mA, FoundationFieldBus, PROFIBUS or Hart. Liquid Level Controller is installed outside the tank. The HS-ULC-Pro Liquid Level Controller works based on the principle of ultrasonic waves, and is also called “externally attached liquid level switch. It is mainly used to detect the liquid level of the storage tank, and its sensor (digital probe) acts on the outer wall of the storage tank. It supports upper and lower limit alarms, tanks Body temperature display or monitor whether there is liquid in the pipeline. Liquid Level Controller is suitable for liquid level process control in the pharmaceutical, petroleum, chemical, electric power and other industries.

The advantages of ultrasonic liquid level gauge are very outstanding. It is mainly reflected in the following aspects : Safe and clean. The instrument has long service life. The measurement is stable and reliable with high precision. Of course, the ultrasonic liquid level gauge also has its own limitations and insurmountable defects. Specifically, it is mainly manifested in: There is a blind spot in the ultrasonic liquid level measurement. The dead zone is the area where the meter cannot measure. During the transmission of ultrasonic pulses, a small area near the ultrasonic transducer usually cannot receive sound waves. The blind zone where sound waves cannot be received is related to the measurement distance of ultrasonic waves. Generally speaking, the smaller the measurement distance, the smaller the blind zone. The larger the measurement distance, the larger the blind zone.

Ultrasonic Level Sensing is a low-cost liquid level measurement technology. Ultrasonic Level Sensing sensors and transmitters are used for tank or river level measurement. Ultrasonic Level Sensing does not need to contact the medium, can be continuously measured, low cost. Therefore, Ultrasonic Level Sensing is very popular among users. Ultrasonic liquid level sensors are available in general and intrinsically safe types. Output 4~20mA standard signal or output the measurement result to the secondary meter through RS-485. Meets the system’s automatic control. See additional info at https://www.drurylandetheatre.com/hs-2000-ultrasonic-tank-level-sensor/.

HS-2000 External Mounted Ultrasonic Tank Level Sensor- (referred to as “external level gauge”). It adopts advanced signal processing technology and high-speed signal processing chip. It breaks through the influence of container wall thickness. Realizes the height of the liquid level in the closed container True non-contact measurement. The ultrasonic liquid level sensor (probe) is installed directly under the outer wall (bottom) of the container under test. Non-contact measurement function , Ultrasonic sensor probe is external. No need to open a hole in the container to be tested.

HS-ULC Ultrasonic Level Switch is specially used to measure the liquid level of tanks. Because it is installed on the outside of the tank, there is no need to punch holes, which is widely welcomed by customers. Of course, if your tank already has holes, you can also choose other tank level transmitters. The ultrasonic principle can also be used to measure water depth. Please refer to Portable Ultrasonic Water Depth Gauge for water depth measurement. The sensor of the external liquid level switch couples the generated high-frequency ultrasonic pulse to the container wall through the couplant. Read extra info at here.