Excavation services in Loveland, Colorado? Excavation safety is a combination of safety precautions and mitigations in and around excavations and trenches to eliminate or control hazards in compliance with industry standards and regulations. Why is Excavation and Trench Safety Important? Excavation and trenching are amongst the most dangerous operations in the construction industry. Dangers can include cave-ins, falling loads, hazardous atmospheres and hazards from using heavy equipment. Regular pre-work inspections can reduce hazards and serious risk of injury. Safety inspections should check for the type of excavation being conducted, support and warning systems in place, access areas, weather conditions, heavy equipment and PPE.

Avoid spending large amounts of money on misguided works that actually reduce the property’s value. Kerb appeal is obviously fundamental when it comes to attracting buyers, so doing anything that messes up an older building’s appearance, no matter how well-intentioned, can be counter-productive. The prime example of this is artificial stone cladding glued to the walls, which apart from looking dire has a tendency over time to start cracking with bits dropping off, blocking windows and air vents. Widening and enlarging window openings can create an instant ‘character transplant’, and putting plastic fascias and windows into period buildings is one of the quickest ways of losing money by slashing their market value.

Trenches 5 feet to 19 feet: OSHA explains that any trench other than those made of stable rock exceeding 5 feet in depth must have a protective system in place. The protective system must be implemented by a competent person. This can be any worker who is qualified and capable of identifying rock and soil composition and hazardous excavating conditions in addition to possessing the knowledge and authority to take corrective action. See additional details at Construction services Fort Collins.

Why you should backfill with stone? Versa-Lok recommends compacting the angular stone as you backfill, but check the installation instructions for the type of block you’re using. Backfill about 8 to 10 inches below the top of the capstones. This will allow enough room for the topsoil and turf. Secure the capstones with a specialty landscape block adhesive, which stays flexible over time. Make sure the blocks are dry before applying the adhesive. Overhang the capstones about 1 to 1-1/2 inch. Joe and Jake use a scrap 2×4 as a guide.DON’T forget to allow for drainage. Groundwater is the natural enemy of retaining walls. When it saturates clay-type soils, they swell and put excessive pressure on the backside of the wall. To avoid failure, make drainage provisions at the same time as you go about building the retaining wall. Backfilling the space behind the blocks with crushed stone and then installing a flexible perforated drainpipe (available at The Home Depot), also called “drain tile,” at the base of the wall could create the necessary escape route for groundwater. The perforated pipe will carry groundwater to each end of the wall where it can drain harmlessly away. The ends of the drainpipe should then exit on each end of the wall, and you may cover them with crushed stone to camouflage their appearance.

Block retaining walls are lightweight, cost-effective, and easy to build. They come in a wider range of styles and colours and are more versatile than concrete sleepers, creating curves and tiered walls can be achieved with ease. Block retaining walls have a wide footprint so if your access is tight or room on your property is at a premium then blocks would not be for you. Find even more information on https://stormheart.net/.