Cylindrical roller manufacturer today: Needle roller bearings are essentially cylindrical roller bearings except that their cylindrical rollers have a length 3 to 10 times their diameter (versus a length less than 3 times their diameter). Needle bearings are also essentially bearings that utilize small & cylindric rollers. Therefore, the ratio of the bearing outside diameter to the inscribed circle diameter is small, and they have a rather high radial load capacity. Even though they have a low cross section, needle roller bearings have a high radial load capacity and are exceptionally apt for bearing applications where radial space is limited. NJ Series – Are single row cylindrical roller bearings and have two fixed ribs on the outer ring and a fixed rib on the inner ring which can guide the shaft in a single direction (axially). NUP Series – Are single row bearing roller cylindrical and have two fixed ribs on the outer ring and, on the inner ring, a fixed rib and a support washer. This way they can be used as locating bearings, guiding the shaft axially in both directions. RNU Series – Are single row cylindrical roller bearings and have two fixed ribs on the outer ring and has no inner ring. Instead, it uses the shaft as the opposing raceway. Read extra details at https://www.jnsnbearing.com/needle-roller-bearing.html.
JnSn needle roller bearing manufacturer have a high capacity for load carrying. They can also operate at high speeds with slim designs that allow use with limited radial space. Our HK Style needle roller bearings are available with or without an outer ring, and drawn cup needle roller bearings generally do not have an inner ring. The drawn cup style provides high load capacity along with large grease reservoirs. The under rollers are available in various diameters, and the hk bearings are capable of a range of dynamic and static loads. Bearings are also available with seals in inch or metric measurements. Needle roller bearings standard are suitable for the automotive industry parts such as rocker arm pivots, compressors, transmissions, and drive shafts.
NJ type cylindrical roller bearings have ribs on both sides of the outer ring, and the inner ring has ribs on one side. Can withstand a certain amount of one-way axial load. The outer ring of the cylindrical roller bearing NJ type has a rib on one side and a rib on both sides of the inner ring. It can also withstand a certain amount of one-way axial load. Therefore, this type of structure is suitable for use as a unidirectional axially oriented bearing. The cylindrical roller bearings are widely used in large and medium motor, locomotive vehicle, machine tool spindle, internal combustion engine, generator, gas turbine, gearbox, rolling mill, vibrating screen and so on.
In office automation tools, the office environment requires bearings to have good features such as low noise, high temperature resistance, and low starting torque. The copier also puts forward higher requirements on the electrical conductivity of the bearing. Because these bearings are usually miniature bearings, and most of them are thin-walled series, and some require flanged design, higher requirements are placed on the manufacturing process and equipment accuracy. In medical equipment, low rotational torque, low noise, and good flexibility are the basic requirements for bearings, and the safety characteristics of bearing materials, the safety characteristics of bearing grease, the anti-rust performance of bearings, and the service life of bearings are all under consideration. In the range. Read extra information at https://www.jnsnbearing.com/.
Single row deep groove ball bearings 6200 series with a ring groove can simplify the installation technically, as the bearings can be inserted with a locking ring into the housing in the axial direction. The nap rings are used on the outside edge. This saves time and space. The appropriate locking rings can be supplied separately (supplement N) or pre-assembled on the bearing (supplement NR). Both open (unsealed) and steel shields or rubber seals versions of the single-row deep groove ball bearings are available, and they are all pre-lubricated with grease. While many different retainers are available, ball bearings use standard cages of pressed steel, as well as machined, brass cages for high-speed applications. Deep groove radial ball bearings are used to transmit loads from rotating parts to housings with minimum friction loss. This will be obtained by a high hardness, minimizing the deformation of the bearing elements. Additional design measures ensure an undisturbed free rolling action, the measures includes the radial clearance, materials and precision.
The company has rich experience in the industry of bearing production and export. We focus on not only the domestic market, but also the international market. Moreover we integrate R&D, production and export of bearings. We constantly strive for research and innovation development, adhere to the concept of “survival of high quality”, and provide excellent service for customers. Our employees receive professional training. Our competence to work out a proposal that springs a “before vs after” clear your worries. Our concept of “ survival of high quality” urges us to attach great importance to our products quality and price, thus we have absolute strengths on them.
Easy Interchange – Designed as metric bearings, our deep groove ball bearings follow ISO standards and are dimensionally interchangeable with competitor metric products. Premium Lubricants – For reduced torque and a quieter operation, premium lubricant comes standard on all sealed and shielded deep groove ball bearings. This grease has a temperature range from -29℃ to 177℃. Brass Cage Availability – Deep groove ball bearings with brass cages (available in select sizes) can deliver extra strength and durability in the most unrelenting conditions: extreme shock loads, high vibrations and high forces due to acceleration. Quiet Running for Electric Motor Quality – Deep groove ball bearings are frequently used in electric motor applications to minimize vibration and noise.
The deep groove ball bearings 6000NR series are equipped with groove and circlip in outer ring. The snap ring is made from a spring steel material and fits into an annular groove around the outside of the bearing which is offset to one side. And the snap ring groove can simplify arrangement design as the bearings can be axially located in the housing by a snap (or retaining) ring, saving space. These deep groove ball bearing types are available in open, shields or sealed option. The bearings are with metal shields or contact seals offering some protection against mechanical damage and serving to retain the lubricant in the sealed for life bearing. The deep groove ball bearings 6000NR series have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.