Top rated altitude control valve supplier factory: Industrial Processes: Many industrial processes require precise control over liquid levels to maintain efficiency and safety. Altitude valves can be found in various industries such as manufacturing, food processing, and chemical plants, where they regulate liquid levels for optimal operation. Sewage Treatment Plants: Altitude valves are also used in sewage treatment plants to manage the level of wastewater within specific compartments or tanks. By preventing overflows or emptying too quickly, these valves contribute to effective treatment processes. Plumbing Systems: In buildings with multiple floors or complex plumbing setups, altitude valves are installed to balance the pressure between different sections of the system while ensuring consistent supply throughout. Read even more info on altitude valve.
Solenoid control valve is an on-off control valve that either opens or closes upon receiving an electrical signal to the solenoid pilot control. This valve consists of a main valve and a two-way solenoid valve that alternately applies pressure to or relieves pressure from the diaphragm chamber of the main valve. It is furnished either normally open (de-energized solenoid to open) or normally closed (energized solenoid to open). Liquid level control can be provided by using a float switch or electrode probe which sends an electrical signal to open or close the valve as needed. As one of the best solenoid control valve manufacturers, industrial uses for our automatic solenoid valve are many and include accurate control of process water for batching, mixing, washing, blending or other on-off type uses.
FBGD is a double eccentric flange butterfly valve, with soft seal on the body, it has the lowest operational torque, much less wearing, the dovetail seal design has been proven over half century service with reliability. Features: The butterfly valve is made of DI body and DI disc; Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure; The double eccentric design provides less contact area of seal with disc, and less stress at the open position of the disc; The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight . The shaft and disc connection with tangential pin which can be exchangeable and provide rigid connection. The DN 100-500MM use flat disc, and DN 600-1200MM use arch shape disc; Epoxy coated interior and exterior. Valve design meets or exceeds EN 593; Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.
Level control valve is a type of valve that automatically responds to changes in the height of a liquid in some storage system, it can automatically open the valve to control the function of the water pipeline, applicable to industrial and mining enterprises, civil building in various kinds of water tower (pool) automatic water supply system. The liquid level control valve is designed to open fully when the liquid level reaches a preset low point, and close drip-tight when the level reaches a preset high point. The float pilot is remotely installed inside of reservoir, or integrally installed with main valve for size less than 4 inch. The high and low point can be adjusted on the spot. The max adjustable distance is 0.5m, if need more, consult factory. If you wan to buy water level control valve you can come to SHSUOTE, our valve of small, easy to install, enabling high sensitivity, small head loss without water hammer. Discover additional information at https://www.shsuotevalve.com/.
What is an Altitude Valve? An altitude valve, also known as an altitude control valve or altitude regulator, is a type of valve used in water distribution systems. It is designed to maintain a specific water level or pressure within a storage tank or elevated structure. The purpose of an altitude valve is to control the flow of water into or out of a storage tank to maintain a predetermined level or pressure. It functions by automatically opening and closing based on changes in water level or pressure. When the water level or pressure drops below the desired set point, the altitude valve opens to allow water to flow into the tank, replenishing the supply. Conversely, when the water level or pressure rises above the set point, the valve closes to prevent overfilling or excessive pressure.
With their constant R&D and sustainability process, SHSUOTE can provide qualitative indusrial valves at an affordable price to the customers. We have a sales and technical team with excellent customer service: 24-hour online service to meet the needs of multi-national languages, English, Russian and Spanish. According to customers to provide API, DIN, JIS, GB, gost and other national standards of technical drawings and can provide customized services. Our custom valves are widely praised by customers. If you are looking for reliable custom valve manufacturer, welcome to contact SHSUOTE Valve. With 20 year of manufacturing experience, we now could offer more than 45 series valves and related parts, such as hydraulic control valve, gate valve, butterfly valve, check valve, pressure reducing valve and so on.