Industrial valves factory in China: Founded in 2004, SUOTE VALVE is one of the leading valve manufacturer and water treatment solutions provider. With years’manufacturing experience, we now could offer more than 45 series valves and related parts, such as hydraulic control valve, gate valve, butterfly valve, check valve, pressure reducing valve and so on. Most of our certificated products sell to over 36 cities in Europe, North America, South America, Africa, etc. With years’ manufacturing experience, we now could offer more than 45 series valves and related parts. Spare parts will be provided at cost price. With the expansion of the international market, We are inviting more overseas partners to join us.You’re welcome to work with us. Find more info on valve manufacturers.
Solenoid control valve is an on-off control valve that either opens or closes upon receiving an electrical signal to the solenoid pilot control. This valve consists of a main valve and a two-way solenoid valve that alternately applies pressure to or relieves pressure from the diaphragm chamber of the main valve. It is furnished either normally open (de-energized solenoid to open) or normally closed (energized solenoid to open). Liquid level control can be provided by using a float switch or electrode probe which sends an electrical signal to open or close the valve as needed. As one of the best solenoid control valve manufacturers, industrial uses for our automatic solenoid valve are many and include accurate control of process water for batching, mixing, washing, blending or other on-off type uses.
Surge Control Altitude Valve: Designed to prevent hydraulic shocks caused by sudden changes in flow rates, surge control altitude valves protect pipelines from damage and maintain stable pressure conditions. Combination Air Release/Altitude Valve: These versatile valves combine both air release and altitude control functions into one unit, providing efficient operation while eliminating excess air from pipelines. It’s important to choose the right type of altitude valve for your specific application to ensure optimal performance and longevity. Altitude valves have a variety of applications in different industries and settings. Let’s take a look at some common uses for altitude valves.
Check valve is a device that allows the flow of fluids to move only in one direction, the primary purpose is prevent backflow in the system. This valve opens when the pressure at the inlet exceeds the outlet pressure. A gradual rate of opening prevents sudden opening surges. SHSUOTE is the best check valve supplier in China,check flow valve can ensure gasses or liquids are flowing in the right direction, and create tight seals to prevent leaks. When a pressure reversal occurs the higher downstream pressure is applied to the cover chamber through the control tube lines, and the valve closes drip tight. Our check valve also is a hydraulically operated No-slam check valve. As a leading check valve manufacturer since 2004, our hydraulic check control valves adopted rubber disc assures tight sealing, they are ideally suited for use where a positive shutoff is required. The velocity of Open/Shutoff can be controlled by the ball valve on the outlet control tube line. See extra info at shsuotevalve.com.
What is an Altitude Valve? An altitude valve, also known as an altitude control valve or altitude regulator, is a type of valve used in water distribution systems. It is designed to maintain a specific water level or pressure within a storage tank or elevated structure. The purpose of an altitude valve is to control the flow of water into or out of a storage tank to maintain a predetermined level or pressure. It functions by automatically opening and closing based on changes in water level or pressure. When the water level or pressure drops below the desired set point, the altitude valve opens to allow water to flow into the tank, replenishing the supply. Conversely, when the water level or pressure rises above the set point, the valve closes to prevent overfilling or excessive pressure.
The valve is made of DI body and DI disc; Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure; The double eccentric design provides less contact area of seal with disc, and less stress at the open position of the disc; The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight . The shaft and disc connection with tangential pin which can be exchangeable and provide rigid connection; The DN 100-500MM use flat disc, and DN 600-1200MM use arch shape disc; Epoxy coated interior and exterior; Valve design meets or exceeds EN 593; Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.