Recently, one of our consultants was carrying out a survey in a foundry. They had installed this type of booth for their fettling operations. However, as can be seen in the following photograph, The booth was not being used in the way intended – the worker was carrying out the work outside the booth. The dust generated was not contained and, consequently, the extraction would not be as effective as it should be. The worker will have a higher exposure than if he carried out the fettling inside the booth.
CoSHH regulations require most LEV systems to be thoroughly tested at least once every 14 months. This applies to all oil mist, welding fume, smoke and dust extraction units that you currently have on site. This examination must be undertaken by a competent person and the tests and reports must conform to HSE standards. HSG258 provides the recommended procedures to achieve these statutory requirements.
According to the HSE, around 13,000 workers in the UK die each year from historic work-related exposure to airborne contaminants at work leading to lung disease and various cancers. These figures are estimated to be attributed to past exposure, primarily to chemical and dust at work.
Equipment that draws pollutants from an operation or process in the working environment. Made up of an inlet like a hood, slit, arm, cabinet or booth. This will be located near to or close to the area of the substance release. All suchlike equipment needs to be connected by ducting and a fan to enable the movement of air. The removed air passed through a filter or is extracted to atmosphere away from the workplace. How Welding Supplies Direct can help ? WE will carry out a thorough tests in line with COSHH Regulation 9 as detailed in HSE Guide HSG258 Our levels of service can be tailored to your Companies needs. However, most clients choose to take advantage of by combining servicing with the LEV testing. Read extra details on https://www.weldingsuppliesdirect.co.uk/welding-equipment/lev-testing.html.
Thousands of British workers contract occupational lung diseases such as occupational asthma and chronic obstructive pulmonary disease each year. Many people die or are permanently disabled by these conditions and are unable to work. People develop these diseases because they breathe in too much dust, fume or other airborne contaminants at work, often because control measures do not work well enough. Most industries are affected, including woodworking, welding, paint-spraying, stonemasonry, engineering and foundry work.